How do I set the resolution of my camera?

by Prisual-PTZ February 22, 2021

The Prisual cameras have multiple simultaneous outputs and setting the resolution can be different for each of them.

Streaming:

When pulling either of the streams from the camera [ rtsp://<camera IP address>/1 (HD) or rtsp://<camera IP address>/2 (SD) ] their Resolutions, Frames Rates, I Frame Interval and CBR /VBR can only be set via the web interface in the Video Section.

HDMI / CVBS / SDI:

The resolution for these outputs is set via the yellow dial on the back of the device, and the chart on the bottom of the camera will help correlate resolution to the DIAL indicators.

(Note that a change to the resolution will require a reboot of the camera)

(Click HERE to see more related information.)

USB:

The USB resolution needs to be set according to the application used. For example, in OBS, set "Resolution/FPS Type" to "Custom", and then set "Resolution", "FPS" and other options.